Reading module
Slide 1 of 7
Arrival & Greeting
- Arrive at the location at least 30 minutes prior to the ETA of the aircraft.
- Be at the gate or ramp when the aircraft pulls up. Take note of the aircraft number.
- When the door opens, show your badge if necessary and go to the cockpit.
- Advise the pilots that you are maintenance and see if there are any known issues.
- If at a jet bridge, advise the pilots of the door code for re-entry and advise them you will be around if anything comes up.
Foundations
Allegiant
Meet and Greet
Line Maintenance
SOP
Allegiant Meet & Greet SOP
The Allegiant meet-and-greet line-maintenance workflow — arriving 30 minutes early, greeting the pilots at the gate/ramp, aircraft walkaround, the rule that no work is performed until MCC is contacted with supporting MM references, the 6-foot / 2-person assist rule, live schedule & WO time logging, staying 30 minutes after departure, and the STL travel-time and tech-turnover rules.
0 viewsOct 8, 2026Read & Quiz
Systems & tools used
- Live schedule
- Quantum MX (Work Order / timesheet)
- Maintenance Manual (MM) references
- Company badge
SOP & compliance notes
- If there are write-ups, DO NOT perform any work until you have contacted MCC and only do as directed by them with supporting MM references
- If work requires 2 people or work above 6 feet on a ladder, call for an additional tech to come assist